Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX964W - (PPE+PA*) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL GTX™ Resin GTX964W:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Noryl GTX datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
제품 설명서
NORYL GTX™ 964W resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA) that exhibits very high impact resistance and high flow. This injection moldable grade was designed for large parts, such as automotive body panels, thin wall applications, and structural members for energy absorption.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 7 cm³/10min ISO 1133
온도 280 °C -
하중 2.16 kg -
기계적 특성값단위시험규격
ISO 데이터
항복강도 50 MPa ISO 527
항복변형률 4 % ISO 527
파단시 강도 45 MPa ISO 527
파단시 신율 50 % ISO 527
굴곡 계수 1800 MPa ISO 178
챠피 노치드 충격 강도, +23°C 45 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 20 kJ/m² ISO 179/1eA
아이조드 노치 충격 강도, +23°C, 4mm 50 kJ/m² ISO 180/1A
아이조드 노치 충격 강도, -30°C, 4mm 20 kJ/m² ISO 180/1A
아이조드 충격은 노치, +23°C 50 kJ/m² ISO 180/1A
아이조드 충격은 노치 20 kJ/m² ISO 180/1A
온도 -30 °C -
ASTM 데이터
항복강도 44 MPa ASTM D 638
파단시 신율 56 % ASTM D 638
굴곡 계수 1830 MPa ASTM D 790
아이조드 충격은 노치, 1/8 in 528 J/m ASTM D 256
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 0.45 MPa 175 °C ISO 75-1/-2
비카트 연화 온도, A 240 °C ISO 306
비카트 연화 온도, B 175 °C ISO 306
비카트 연화 온도, 120°C/h 50N 180 °C ISO 306
ASTM 데이터
DTUL @ 66 psi 185 °C ASTM D 648
열전도율, 솔리드 0.0332 W/(m K) ASTM C 177
기타 특성값단위시험규격
물에서의 흡수성, 평형 1.19 % ASTM D 570
밀도 1080 kg/m³ ASTM D 792
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 95 - 105 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.07 % -
용융수지온도 295 - 315 °C -
성형온도 75 - 120 °C -
Zone 1 275 - 315 °C -
Zone 2 280 - 315 °C -
Zone 3 290 - 315 °C -
Screw speed 20 - 100 rpm -
Back pressure 0.3 - 1.4 MPa -
특징
생산 공정
사출 성형
특별 특성
고충격 또는 고충격 보강
응용
자동차의
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.